Cleaning a fully automatic vacuum packaging machine is actually not difficult. The core steps are: power off, zoned cleaning, and regular maintenance. Let me break down the specific steps for you:
Preparation and Safety Before Cleaning
Power Off Always: Disconnect the power supply before operation and wait for all parts to stop.
Tools Needed: Soft cloth, neutral detergent, soft brush, cotton swabs, compressed air (optional).
Component Cleaning Steps
Vacuum Chamber: Blow away particles with an air gun, then wipe the inner wall with a damp cloth.
Heat Seal Strip: Gently scrape off any sticky substances with a blade, avoiding damage.
Sealing System
Sealing Strip: Clean with alcohol or a special cleaner, rinse with water, and dry.
Pressure Surface: Wipe with warm water; clean the grooves with cotton swabs to remove food residue.
Moving Parts: Wipe suction cups, conveyor belts, etc., with a dry cotton cloth, ensuring they are free of oil.
Gears and bearings: Lubricate regularly with machine oil.
Filter and suction device
Suction filter: Clean regularly to prevent a decrease in pumping speed.
Suction valve: If leaking, remove, clean, and blow clean.
Deep cleaning and maintenance recommendations
Monthly deep disinfection: Wipe the inner cavity with a white vinegar solution (1:3).
Disinfect key components with medical alcohol wipes.
Irradiate with ultraviolet light for 15 minutes (non-contact).